home *** CD-ROM | disk | FTP | other *** search
/ User's Choice Windows CD / User's Choice Windows CD (CMS Software)(1993).iso / demos / fgw3.zip / README.TXT < prev    next >
Text File  |  1991-10-21  |  8KB  |  180 lines

  1. Adobe Type Manager (R) 1.15 Release Notes
  2. Windows Version
  3. April 15, 1991
  4.  
  5. Adobe Type Manager is a registered trademark of Adobe Systems 
  6. Incorporated.  Copyright 1983-1991 Adobe Systems Incorporated.  
  7. All Rights Reserved.  Patents Pending.
  8.  
  9. ------------------------------------------------------------
  10. APPLICATION-SPECIFIC NOTES
  11.  
  12. >>    Ami Professional 1.2
  13. > Twelve-point Tms Rmn text may not enlarge in Ami's Enlarged view.  
  14. This also occurs without ATM.  Use Times instead of Tms Rmn.
  15. > If you use Ami's Pair Kerning option, wait until you are ready 
  16. to print before activating it, rather than leaving it on all the 
  17. time.
  18.  
  19. >>    Corel Draw 1.21 & 2.0
  20. These versions of Corel Draw do not support ATM.
  21.  
  22. >>    PageMaker 3.01 & 4.0
  23. > For the best results with ATM, set the Vector text above and 
  24. Stretch text above limits in PageMaker's Preferences dialog box 
  25. to 600 pixels (the maximum) for PageMaker 3.01 and 10,000 pixels 
  26. for version 4.0.  Earlier versions had a maximum of 127 pixels.
  27. > Underline and strikeout lines may appear broken when automatic 
  28. kerning and/or justification is in effect, due to the way 
  29. PageMaker handles automatic kerning.  Turning paired kerning off 
  30. will correct this problem.
  31.  
  32. >>    PowerPoint 2.0
  33. For the best results at small point sizes on screen, remove the 
  34. "Small Fonts" font using the Fonts option in the Windows Control 
  35. Panel.
  36.  
  37. >>    Toolbook 1.0
  38. Text may appear jagged when printed from Toolbook.  This is 
  39. because Toolbook does its own scaling of the screen image for 
  40. printing, rather than using Windows' (or ATM's) font facilities.
  41.  
  42. >>    Ventura Publisher Windows Edition v3.0
  43. > Backspacing at the end of a line sometimes causes the line to 
  44. move down the screen one line per backspace.  This also occurs 
  45. without ATM.
  46. > In Reduced View, the fonts Helvetica and Times will not display 
  47. correctly.
  48.  
  49. >>    Word for Windows 1.1
  50. > The typeface used in the ruler and in the status bar may not be 
  51. Helvetica.  This is normal -- Word uses the first variable pitch 
  52. sans-serif font available in the [Fonts] section of your ATM.INI 
  53. file.
  54. > The bullet character displays and prints as a lowercase "o".  
  55. This is a feature of Word.
  56.  
  57. >>    Excel 3.0
  58. >  When printing to a PCL printer such as the LaserJet Series II, 
  59. make sure that the print resolution in the printer setup menu is 
  60. set to 300 dpi.
  61. > If you are using rotated text in graphs, you must remove the aliases 
  62. for the Roman and Modern fonts.  See "Windows Vector fonts" below.
  63.     
  64. -----------------------------------------------------------
  65. GENERAL HINTS AND TIPS
  66.  
  67. >>    "Times" vs. "Tms Rmn" 
  68. Both Times and Tms Rmn appear in your applications' font menus when 
  69. ATM is on.  While ATM automatically substitutes Times whenever it 
  70. sees Tms Rmn (for backward compatibility with existing documents), 
  71. itis more reliable to select Times instead.  The same is true for 
  72. Helvetica vs. Helv.
  73.  
  74. >>    Maximum number of fonts
  75. ATM 1.15 can install a maximum of 1500 fonts. However, Windows 
  76. apparently limits the number of PostScript soft font entries in 
  77. your WIN.INI file to approximately 175.  If you get spurious 
  78. printer error messages when starting your application or switching 
  79. to a PostScript printer, you may have reached this limit. Turn off 
  80. ATM and restart Windows.  If the condition still persists, you must 
  81. manually remove these entries from your WIN.INI file.
  82.  
  83. >>    Windows vector fonts
  84. ATM will substitute its scalable Times and Helvetica for Windows' 
  85. Roman and Modern, respectively, in order to eliminate the "stick-
  86. figure" appearance of these fonts.  If you don't want ATM to make 
  87. this substitution, delete the following two lines from the 
  88. [Aliases] section of your ATM.INI file:
  89.     Roman=Times
  90.     Modern=Helvetica
  91.  
  92. >>    PostScript printer font downloading
  93. The Add font option in the ATM Control Panel adds the selected 
  94. fonts to every PostScript printer in WIN.INI as manually downloaded 
  95. fonts.  This configuration minimizes printing time since fonts will 
  96. not be downloaded by Windows every time there is a font change in 
  97. your document; however, the desired fonts must be resident in the 
  98. printer (either in memory or on the printer's hard disk) before printing.  
  99. You can reconfigure a manually downloaded font as an automatically 
  100. downloaded font by modifying its entry in the PostScript section of 
  101. WIN.INI.  See the documentation provided with your font package for 
  102. more information.
  103.  
  104. >>    Re-installing or installing a new version of ATM
  105. If you already have a version of ATM installed on your system, 
  106. turn it off using the ATM Control Panel and restart Windows before 
  107. running the ATM Installer.
  108.  
  109. ------------------------------------------------------------
  110. TROUBLESHOOTING
  111.  
  112. Problem: ATM displays the message "ATM fonts and PostScript printer 
  113. fonts don't match on xxx."
  114.  
  115. Solution: "xxx" is the name of the first font that does not match.  
  116. This message appears if your PostScript printer is not "active" or if 
  117. you have changed printer ports since installing fonts through the ATM 
  118. Control Panel.  To reactivate your printer, you must use the Printers 
  119. option in the Windows Control Panel; selecting the printer from your 
  120. application's Printer Setup menu alone is not enough.  If you have 
  121. changed printer ports, you must add the fonts again through the ATM 
  122. Control Panel.
  123.  
  124.  
  125. Problem: Justified text sometimes extends beyond the right margin 
  126. on screen.
  127.  
  128. Solution: Turn off the "Use pre-built or resident bitmap fonts" 
  129. option in the ATM Control Panel.  
  130.  
  131.  
  132. Problem: Italic or script fonts are sometimes clipped at the end 
  133. of a line or at the current cursor position.
  134.  
  135. Solution: This is a limitation of Windows and affects only screen 
  136. display of text.  The text will print correctly with ATM.
  137.  
  138.  
  139. Problem: Some colors of text print incorrectly on an HP PaintJet.
  140.  
  141. Solution: Version 1.0 of the HP PaintJet driver and version 1.0 
  142. of Zenographics' SuperPrint do not correctly support color printing 
  143. with ATM.  Version 1.1 of SuperPrint and version 1.01 of the HP 
  144. driver correct this problem.
  145.  
  146.  
  147. Problem: Ventura Publisher v3.0 displays a "Divide by zero" error 
  148. message.
  149.  
  150. Solution: This is due to the way Ventura Publisher manages font 
  151. information.  Exit Ventura Publisher, remove some fonts using the 
  152. ATM Control Panel and restart Windows.  Contact Ventura for the 
  153. "11/90 patch" disk at (800) 822-8221.
  154.  
  155.  
  156. Problem: Selecting text in Ami Professional 1.2 seems sluggish.
  157.  
  158. Solution: Turn off the Pair Kerning option in Ami's Defaults menu 
  159. until you are ready to print.  The sluggishness also occurs without 
  160. ATM when using printers that support automatic kerning (such as 
  161. PostScript printers).  The sluggishness is due to Ami's extra 
  162. overhead in performing its kerning calculations.  Since ATM provides 
  163. automatic kerning capabilities for all Windows-supported printers, 
  164. this suggestion also applies to non-PostScript printers.
  165.  
  166.  
  167. Problem: Courier text is clipped at sizes smaller than 9 point on 
  168. screen and on printed output.
  169.  
  170. Solution: In order to avoid problems with applications that do 
  171. not handle Courier correctly, ATM must return a fixed-size screen 
  172. bitmapped font for small sizes.  You can change this by deleting 
  173. the following line from the [Aliases] section of your ATM.INI file:
  174.     Courier=Courier
  175. ATM will then provide the exact (unclipped) size of Courier requested 
  176. by your applications.  Note that some applications don't expect to 
  177. receive the size they requested.  For example, the numbers in the 
  178. ruler of AmiPro 1.2 will be displayed in 1 point type.
  179.  
  180.